Classes / Construction Corps class / Drilling Department
Drilling Track: Rigs, Well Control and Geothermal · Rank 5 coursework · Module 1 of 3 · about 40 min
Leading a rig crew: job safety analysis and stop work
A shift boss runs the floor through planning. A job safety analysis (JSA, also called a job hazard analysis) breaks a task into steps, lists the hazards in each step, and sets the controls before anyone starts. OSHA publishes guidance on how to do one.
The pre-tour meeting is where the JSA comes alive. Go through the plan, ask the newest hand to explain a step back, and change the plan if conditions changed. A JSA nobody read is just paper.
Stop work authority means anyone on location can stop a job they think is unsafe, without getting punished for it. It only works if leaders back it every time, including when it costs rig time.
OSHA’s oil and gas eTool lists the big hazards on a rig: struck-by and caught-in, falls, fires and explosions, and toxic gases such as hydrogen sulfide. Every JSA on your crew should account for the ones that apply.
We make the hazard analysis specific to the task's interfaces and changing conditions. OSHA's hazard-identification guidance asks us to involve workers, inspect operations, consider nonroutine work and investigate close calls for underlying causes. A signature on yesterday's JSA does not establish that today's access, staffing, equipment or simultaneous activity still matches it. We distinguish the existence of a document from evidence that people understand and can use its controls.
Worked example, fictional pre-tour review: yesterday's plan separates a delivery route from a suspended-load area. A new delivery time now overlaps that activity, but both teams cite their unchanged checklists. The unresolved issue is the interaction between otherwise familiar tasks. We bring the changed interface to the responsible planning review rather than assume two signed sheets make simultaneous work safe. A new worker's inability to explain the boundary is useful feedback, not proof that the worker should stay silent.
Practice, on paper: we revise a fictional task-step, hazard, control and owner table for a changed route and a near miss. Our self-check asks whether the plan addresses the actual exposure and records what must be resolved before restart. We perform no lift or equipment movement and do not invent a universal legal stop-work rule from a site's policy.
Sources
- OSHA: Oil and Gas Well Drilling and Servicing eTool
- OSHA: Job Hazard Analysis (Publication 3071)
- OSHA recommended practices, hazard identification and assessment
Module quiz
10 questions, 8 correct to pass. You'll see what you missed and why, and you can retake it.