Join the crewMy track

Classes / Manufacturing & Processing class / Oxygen Department

Oxygen Track: Electrolysis, Gases and Pressure Systems · Rank 6 coursework · Module 1 of 3 · about 50 min

Process safety management

OSHA's Process Safety Management standard, 29 CFR 1910.119, applies to processes that involve listed highly hazardous chemicals above threshold quantities, and to large amounts of flammable liquids and gases. It exists to prevent fires, explosions and toxic releases.

The standard has core elements that work together: employee participation, process safety information, process hazard analysis, operating procedures, training, contractor safety, pre-startup safety review, mechanical integrity, hot work permits, management of change, incident investigation, emergency planning and compliance audits.

Some have clocks. Process hazard analyses must be updated and revalidated at least every five years, and compliance audits must be done at least every three years. Incidents that caused or could reasonably have caused a catastrophic release must be investigated.

Management of change is one connected part of a covered PSM program. Changes other than actual replacements in kind require the applicable review before implementation, including technical basis, safety effects and required information, procedure and training updates. We do not invent a ranking that most risk resides in one program element.

We check PSM coverage before applying its specific duties, including listed chemicals, quantities and exceptions. For covered changes, the standard distinguishes replacements in kind, which satisfy the design specification, from other changes affecting the process. A part with the same external dimensions is not necessarily equivalent in material, control function or service performance. A convenient label cannot establish that exception.

Worked example, fictional change review: a replacement valve fits the same flange but has different material and fail behavior. Calling it like-for-like based only on fit is unsupported. The responsible assessment needs the actual specification, technical basis, safety effects, procedure updates, training and authorization as applicable. Academy arithmetic and a purchase receipt do not approve that change.

Practice, on paper: we trace the fictional change through process information, operating procedure and affected-worker training. Our self-check distinguishes the five-year hazard-analysis revalidation clock from the three-year compliance-audit clock and from responding to a current change. Those intervals do not authorize waiting years to review a new deviation. We change no valve, setpoint, chemical or operating procedure.

Sources

Module quiz

10 questions, 8 correct to pass. You'll see what you missed and why, and you can retake it.

Next: Leading an oxygen production site →