Classes / Manufacturing & Processing class / Processing Department
Processing Track: Mineral Processing, Refining and Recycling · Rank 4 coursework · Module 1 of 2 · about 40 min
MSHA miner training
The Mine Safety and Health Administration requires training for miners, and it is the law, not a courtesy. Training rules sit in 30 CFR Part 46 for many surface sand, gravel and stone operations, and Part 48 for other mines, including processing plants at metal mines.
New miners at surface operations need at least 24 hours of training, with part of it before they start work. Every miner then needs at least 8 hours of annual refresher training. Task training is required whenever someone is assigned a new job they have not done before.
MSHA runs the National Mine Health and Safety Academy and publishes training materials, and records of training must be kept and made available to inspectors.
At this learning rank we examine task-training records and evidence of competence on paper. Actual delivery and sign-off belong to the properly qualified and designated people under the applicable mine training plan. Part 46 and Part 48 training and sign-off stay with the people designated under the mine training plan. This lesson helps us review those records and prepare for that training.
We identify the applicable training system before applying its numbers. Part 46 and Part 48 have different mine coverage, plans and conditions. Under the reviewed Part 48 surface provision, the default twenty-four hours precedes assignment; a partial-training route requires its authorized approved-plan conditions. MSHA sets those minimum hours. Changing our lesson length does not change them, and this lesson is good preparation for the operator's required Part 46 or Part 48 program; the MSHA training page is in the sources below.
Worked example, fictional record review: a person has eight hours of site instruction and a course certificate, but the mine coverage and approved training arrangement are unknown. We still need the mine's Part 46 or Part 48 plan and the required task-training evidence before assignment. This lesson helps us read those records and prepare for that training.
Practice, on paper: we compare a fictional task assignment with the training record, plan, required content and designated trainer evidence. Our self-check distinguishes attendance from demonstrated task competence and required documentation. Part 46 training is delivered by a competent person designated by the operator, and Part 48 training is delivered by an MSHA-approved instructor. This lesson is good preparation for that training; the MSHA training page is in the sources below.
Sources
Module quiz
10 questions, 8 correct to pass. You'll see what you missed and why, and you can retake it.