Join the crewMy track

Classes / Fleet & Robotics class / Rover Ops Department

Rover Ops Track: Autonomy, Field Maintenance and Drones · Rank 5 cornerstone reading · about 90 min of reading

Cornerstone reading: OSHA Technical Manual, Section IV, Chapter 4: Industrial Robot Systems and Industrial Robot System Safety

The skill this builds. Read a cornerstone work in our field and apply its lessons to situations it does not spell out.

This is the chapter OSHA compliance officers use when they inspect a workplace with robots. It lays out how robot systems hurt people, when in their life cycle they do it, and which safeguards and risk assessments are expected, so anyone who leads a robot or autonomous vehicle crew should know it cold.

What to read: Read sections I through VIII and Appendix 1 (the glossary). Skim section IX for the standards it points to.

We read this chapter as the inspector would. It splits a robot application into parts (manipulator, controller, teach pendant, end-effector), then walks through the hazards each stage of its life brings: building it, integrating it, running it and maintaining it.

Pay attention to where the chapter says accidents actually happen. It is rarely during smooth automatic operation. Keep a note of the speed limit for teaching, how an enabling device works, and the difference between collaborative and non-collaborative applications.

The second half is about risk assessment. Notice who is responsible for what: the manufacturer, the integrator and the employer each carry part of the load, and the chapter is clear that having a risk assessment on paper is not the same as being safe.

The test has 10 questions. Half check what the work says; half ask us to apply it to a situation the work does not describe word for word. We need 8 of 10 to pass, and we can retake it after studying.

Sources

Module quiz

10 questions, 8 correct to pass. You'll see what you missed and why, and you can retake it.

Back to the track home →