Classes / Construction Corps class / Surface Ops Department
Surface Ops Track: Site Work, Heavy Equipment and Hauling · Rank 5 coursework · Module 1 of 3 · about 40 min
Cranes and derricks in construction
OSHA's cranes and derricks standard for construction, 29 CFR 1926 Subpart CC, covers power-operated equipment used to hoist, lower and move loads. It addresses ground conditions, assembly and disassembly, inspections, signals and operator qualification.
Crane operators in construction must be certified or qualified under the standard, and employers must evaluate that operators can safely run the specific equipment. Riggers and signal persons must also be qualified.
Power lines are one of the deadliest hazards. Before work, the employer must identify the work zone and determine whether any part of the equipment, load or rigging could get closer than 20 feet to a power line up to 350 kV, and then take the required precautions.
In our review, we look for ground-condition checks, operator and signal-person qualification, the load exclusion area and a response to changed conditions. Actual lift decisions remain with the designated qualified team.
We distinguish operator certification or licensing, employer evaluation and suitability for the actual assignment. Under the cited crane rule, the employer's evaluation addresses equipment-specific skills, configuration and required hoisting activities. A portable certification alone does not establish that evaluation. Exceptions and operator-in-training provisions have their own conditions. This lesson is good preparation for crane operator certification through an accredited testing organization such as NCCCO, and the employer still completes an equipment-specific evaluation. The NCCCO and OSHA rule pages are in the sources below.
Worked example, fictional record review: a certified operator's evaluation covers one configuration, while the proposed assignment uses an attachment requiring substantially different skills. A copied certificate cannot establish those skills. The employer needs the applicable evaluation evidence rather than assuming the machine's familiar brand name resolves the difference. We make no actual lift or operator-qualification decision from this example.
Practice, on paper: we compare the described configuration, evaluation record, signaling arrangement and changed ground conditions. Our self-check separates what the paperwork supports from what needs the responsible person's assessment. Unknown power-line voltage is not converted into an invented safe distance. We perform no lift, rigging, crane setup or energized-line approach.
Sources
- OSHA: Cranes and derricks in construction
- OSHA 1926.1427, operator training, certification and evaluation
- NCCCO crane operator certifications
Module quiz
10 questions, 8 correct to pass. You'll see what you missed and why, and you can retake it.