Classes / Systems class / Systems Department
Systems Track: Spacecraft Links and Flight Software Basics · Module 2 of 4 · about 40 min
Decibels, antennas and the link budget
Comms engineers spend a lot of time on one question: will enough signal arrive to be decoded? The bookkeeping that answers it is called a link budget. You start with the transmitter's power, add the gain of the antennas on each end, subtract every loss along the way, and compare what is left with the noise at the receiver. If the margin is positive with some room to spare, the link closes.
The numbers span enormous ranges, so engineers use decibels. A decibel figure is 10 times the base-10 logarithm of a power ratio. Plus 3 dB is about double, plus 10 dB is ten times, plus 20 dB is a hundred times, and minus 3 dB is about half. The handy part is that multiplying ratios becomes adding decibels, so a whole budget is a column of additions and subtractions.
Antenna gain is measured against an imaginary antenna that radiates equally in every direction, called an isotropic radiator, which is why you see the unit dBi. NASA's own example: Voyager's high-gain antenna has a gain of 47 dBi at X-band, a factor of more than 50,000. Feed it a 20-watt transmitter and the effective power along that narrow beam is around a megawatt. The catch is pointing. A high-gain dish only helps when it is aimed accurately, which is why spacecraft also carry low-gain antennas for emergencies.
The biggest loss is distance. A signal spreads out as it travels, and its strength per square meter falls with the square of the distance: twice as far means a quarter of the power, or about 6 dB less. Over interplanetary distances this loss is huge, which is why deep space receivers are cooled, sensitive and attached to very large dishes.
Frequency matters too. Deep space links have moved from S-band (around 2 GHz) to X-band (around 8 GHz) and now Ka-band (around 32 GHz). Higher frequencies let the same size dish form a tighter beam and carry more data, but they are more affected by rain and humidity in Earth's atmosphere, so a budget for Ka-band carries extra weather margin. We practice reading a link budget table, explaining each line in plain words and keeping its assumptions visible so another reviewer can follow the reasoning.
We make a link-budget worksheet auditable by naming its reference, units and operating assumptions. Gains and losses in decibels are ratios that can be added; watts are physical power and need conversion before logarithmic arithmetic. We do not add a number of watts directly to antenna gain in dBi. A positive result only supports the case whose distance, pointing, receiver assumptions and losses were actually included. An omitted loss is not free margin. Receiver noise and decoding thresholds also belong in the stated baseline.
Worked example, fictional margin check: the original case has three decibels of spare margin. Doubling distance, with everything else unchanged, costs about six decibels. Doubling transmitter power recovers about three. The revised margin is approximately zero, not three. If the worksheet then includes another two decibels of weather loss, it becomes approximately minus two. We record that deficit instead of describing a zero-margin design as comfortably closed. These are classroom changes, not instructions to modify a transmitter.
Directional gain does not create energy. In another fictional example, ten watts through an idealized antenna with twenty dBi gain has an EIRP of about one thousand watts in its favored direction. Twenty dBi represents a factor of one hundred, so the physical transmitter still supplies ten watts. The useful concentration also makes pointing important: an assumed high-gain contribution is not justified if the antenna cannot be kept on target. We check pointing loss separately rather than count nominal gain twice.
We compare candidate budgets at the same boundary. A clear-weather prediction and a degraded-weather case answer different questions. Likewise, changing frequency while keeping dish diameter fixed can change both useful directivity and sensitivity to atmospheric conditions. NASA's chapter describes concentration, received signal power and decoding as parts of one chain. A spreadsheet that improves one line but leaves its new losses out is not a fair comparison between designs.
Practice, on paper: we make baseline and changed-condition columns, then alter distance, power and one stated loss. We show each signed change and distinguish physical transmitter power from directional EIRP. Our self-check includes a sensitivity case with less pointing gain and a note about assumptions still needing engineering verification. We do not claim that this simplified worksheet certifies a real link, assigns a frequency or authorizes radiating equipment.
Sources
- NASA Basics of Space Flight, Chapter 10: Telecommunications
- MIT OpenCourseWare 16.851 Satellite Engineering
- NASA: Deep Space Network
Module quiz
10 questions, 8 correct to pass. You'll see what you missed and why, and you can retake it.
Next: The flight computer: commands, telemetry and fault protection →